Luminaire type Round, decorative LED wall luminaire with single-sided light emission and IP65 protection rating. The wall luminaire, thanks to its optical and technical design features, harmonises with other luminaires that might be used in the project.

Applications For decorative, accentuating lighting solutions in outdoor areas, for building access areas, facades. Can also be used holistically inside buildings.

Mounting methods Surface-mounted luminaire for wall mounting. Mounting bracket of galvanised steel. Corrosion-resistant, screws made of stainless steel A4.

Optical system Reflector of anodised aluminium, facetted. Cover of transparent glass. With direct light distribution. Light emission can be upwards or downwards with appropriate mounting of the luminaire. With rotationally symmetrical wide light distribution. beam angle 60°.

LED system Luminaire luminous flux 1000 lm, connected load 11,00 W, luminous efficiency of luminaire 90 lm/W. Light colour warm white, correlated colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 80. Mean rated service life L80(tq 25 °C) = 50,000 h.

Luminaire body Housing made of extruded aluminium profile, cover frame and wall-mounting housing made of die-cast aluminium. Luminaire body anodised, primed and powder-coated. Colour anthracite, similar to DB 703. Dimensions (L x W): 172 mm x 115 mm, luminaire height 220 mm. On request the luminaire body can be provided without added cost in the following colours: black textured (Akzo Nobel 8118669, similar to RAL 9005), white textured (Akzo Nobel 8158870, similar to RAL 9016), grey textured (Akzo Nobel 8129595, similar to RAL 9006). Other colour variants are available for an additional charge in accordance with the RAL or DB colour code.

Electrical version With electronic transformer, switchable. The LED system with control gear unit is suitable for operation on direct voltage supply grids. (ACmin= 198 V, ACmax= 264 V, DCmin= 176 V, DCmax= 264 V).

---