Luminaire type Square surface-mounted LED luminaire for wall and ceiling mounting with IP65 protection rating. The wall luminaire, thanks to its optical and technical design features, harmonises with other luminaires that might be used in the project.

Applications For decorative, accentuating lighting solutions in outdoor areas, for building access areas, facades. Can also be used holistically inside buildings.

Mounting methods Luminaire is fixed with cast aluminium mounting plate.

Optical system Optical system consists of 1 LED module, cover of 4 mm-thick hardened glass, white.

LED system Luminaire luminous flux 500 lm, connected load 10,00 W, luminous efficiency of luminaire 50 lm/W. Light colour warm white, correlated colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 80. Further LED light colours available on request. Mean rated service life L80(tq 25 °C) = 50,000 h.

Luminaire body Luminaire body of cast aluminium components and cover glass. Luminaire body anodised, primed and powder-coated. Colour anthracite, similar to DB 703. Dimensions (L x W): 260 mm x 260 mm, luminaire height 40 mm. On request the luminaire body can be provided without added cost in the following colours: black textured (Akzo Nobel 8118669, similar to RAL 9005), white textured (Akzo Nobel 8158870, similar to RAL 9016), grey textured (Akzo Nobel 8129595, similar to RAL 9006). Other colour variants are available for an additional charge in accordance with the RAL or DB colour code.

Electrical version With electronic transformer, switchable. The LED system with control gear unit is suitable for operation on direct voltage supply grids. (ACmin= 100 V, ACmax= 264 V, DCmin= 176 V, DCmax= 264 V).

---