Luminaire type
Exclusive round LED suspended luminaire with direct and indirect luminous flux component. Luminaire with Active equipment for controlling light colour via separate control unit.
Applications
For innovative and prestigious office lighting.
Mounting methods
For suspended mounting as single luminaire. Suspension length consists of 400-1750 mm.
Optical system
With Binary Light Guide System (BLGS). Optical system consisting of two fine-prismatic PMMA covers for light emission, one above the other. With direct-indirect light distribution. Indirect component with extremely wide distribution. Glare evaluation (EN 12464-1) according to UGR < 19.
LED system
LED system with lateral entry of light in the Binary Light Guide System. The following information on luminaire luminous flux and power consumption of the system refer to operation of this luminaire with dynamic, settable light colour (HCL) in warm white light colour (2700 K) operating mode. Luminaire luminous flux 5600 lm, connected load 53,00 W, luminous efficiency of luminaire 105 lm/W. Light colour variable (warm white - daylight white), correlated colour temperature (CCT) variable (2700 K - 6500 K), general colour rendering index (CRI) Ra > 80. Mean rated service life L80(tq 25 °C) = 50,000 h.
Luminaire body
Luminaire body of cast aluminium. Surface coated white (RAL 9016). Permissible ambient temperature (ta): -20 °C - +25 °C.
Electrical connection
No separate cable is required for luminaire power supply. Power supply via the wire suspensions. Wire suspension included in the scope of supply.
Electrical version
With two electronic control gear units, digitally dimmable (DALI). Ballast and connection elements are located outside the luminaire body in the ceiling connection unit. White ceiling rose included in scope of supply. The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.
