Welcome to NHS Lighting by Litelite

Opening Hours : Monday to Friday - 8am to 5pm Contact : 0800 032 5615

Arimo Slim Sky

Arimo Slim LED is an extensive and flexible luminaire range enabling almost the complete spectrum of lighting tasks in offices to be carried out with a uniform design – and with two different optics: CDP (planar light) and MRX (micro-reflector). The luminaires emit extremely efficient, glare-free light, simultaneously set attractive accents and offer innovative features.

Contact us +

Product description/details

Luminaire type

LED recessed luminaire with CDP microprismatic cover. Luminaire with Active equipment for controlling light colour via separate control unit. With Sky frame for spatially atmospheric depth effect in the classic, flat module ceiling. The 3-dimensional contour of a rooflight is simulated via the Sky frame.


Applications

For workstations with computer screens. Offices, Corridors, Foyers, Conference rooms, Retail areas, waiting zones. Application also especially in rooms with low room heights for creating a deeper depth effect.


Mounting methods

Lay-in luminaire for ceilings with exposed grids. System dimension 600 x 600 (M73). Recess depth > 160 mm.


Optical system

With narrow-wide light distribution. Glare evaluation (EN 12464-1) according to UGR < 19. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 3000 cd/m² for beam angle above 65° all-round. Harmonious light effect due to homogeneously illuminated light emission.


LED system

LED panels configured with warm white and daylight white light colour LEDs. The following information on luminaire luminous flux and power consumption of the system refer to operation of this luminaire with dynamic, settable light colour (HCL) in warm white light colour (2700 K) operating mode. Luminaire luminous flux 3800 lm, connected load 40,00 W, luminous efficiency of luminaire 95 lm/W. Light colour variable (warm white - daylight white), correlated colour temperature (CCT) variable (2700 K - 6500 K), Colour locus tolerance (initial MacAdam) ≤ 3 SDCM, general colour rendering index (CRI) Ra > 80. Mean rated service life L80(tq 25 °C) = 100,000 h, mean rated service life L90(tq 25 °C) = 50,000 h.


Luminaire body

Luminaire body sheet steel. Surface coated white (RAL 9016). Dimensions (L x W): 595 mm x 595 mm, luminaire height 87 mm. Protection rating on room side IP40. Permissible ambient temperature (ta): - +.


Electrical connection

With 5-pole terminal to 2.5 mm² for mains connection and further wiring. DALI connection and DALI through-wiring to 1.5 mm². Mains connection of control unit is with a connection terminal. For simple and rapid installation, connection between the luminaire and secondary connection control gear unit is via plug connection.


Electrical version

With electronic transformer, digitally dimmable (DALI). Output ripple of the control gear unit ≤ 4 % for effective control of the LED system and for flicker-free light. Connecting the luminaire to the control gear unit is possible with operating voltage on without disturbances. The luminaire is suitable for operation on a 230V direct voltage supply grid (DC). The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.