Welcome to NHS Lighting by Litelite
Opening Hours : Monday to Friday - 8am to 5pm Contact : 0800 032 5615
Arimo Slim LED is an extensive and flexible luminaire range enabling almost the complete spectrum of lighting tasks in offices to be carried out with a uniform design – and with two different optics: CDP (planar light) and MRX (micro-reflector). The luminaires emit extremely efficient, glare-free light, simultaneously set attractive accents and offer innovative features.
Contact us +Recessed LED luminaire with MRX micro reflector and opal PMMA covering.
For workstations with computer screens. Offices, Corridors, Foyers, Conference rooms, Retail areas, waiting zones.
Lay-in luminaire for ceilings with exposed grids. Suitable for installing in ceilings with low intermediate heights. System dimension 625 x 625 (M84). Also suitable for system ceilings with concealed grids and ceiling cut-outs when used with recessing accessories (ArimoS MRX ZBB/1). Further information can be found in the installation instructions.
With micro louvre for good glare reduction. Glare evaluation (EN 12464-1) according to UGR < 19. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 1500 cd/m² for beam angle above 65° all-round.
Direct distribution LED integrated in MRX micro reflector for high efficiency. Luminaire luminous flux 2800 lm, connected load 23,00 W, luminous efficiency of luminaire 121 lm/W. Light colour warm white, correlated colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 80. Mean rated service life L80(tq 25 °C) = 50,000 h.
Luminaire body sheet steel. Surface coated white (RAL 9016). Dimensions (L x W): 622 mm x 622 mm, luminaire height 35 mm. Permissible ambient temperature (ta): -20 °C - +
Luminaires equipped with Linect® luminaire connection system. External connection via Linect© plug connector or conventional method is possible. Wired ready for connection with 3-pole mains connection to 2.5 mm².
With electronic transformer, switchable. Dimensions operating device (L x W x H) 234 mm x 30 mm x 21 mm. The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. A remover tool (2926500) is required to open the luminaire cover (please order tool separately). Linect© plug connector not included in scope of supply.