Welcome to NHS Lighting by Litelite
Opening Hours : Monday to Friday - 8am to 5pm Contact : 0800 032 5615
Square recessed LED ceiling luminaire with prismatic PMMA cover. Luminaire with Active equipment for controlling light colour via separate control unit. With Sky frame for spatially atmospheric depth effect in the classic, flat module ceiling. The 3-dimensional contour of a rooflight is simulated via the Sky frame. Application also especially in rooms with low room heights for creating a deeper depth effect.
Contact us +
Square recessed LED ceiling luminaire with prismatic PMMA cover. Luminaire with Active equipment for controlling light colour via separate control unit. With Sky frame for spatially atmospheric depth effect in the classic, flat module ceiling. The 3-dimensional contour of a rooflight is simulated via the Sky frame.
For workstations with computer screens. Offices, Corridors, Foyers, Conference rooms, Retail areas, waiting zones. Application also especially in rooms with low room heights for creating a deeper depth effect.
Lay-in luminaire for ceilings with exposed grids. System dimension 600 x 600 (M73). Recess depth > 160 mm.
With narrow-wide light distribution. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 3000 cd/m² for beam angle above 65° all-round. Harmonious light effect due to homogeneously illuminated light emission.
Luminaire luminous flux 4200 lm, connected load 40,00 W, luminous efficiency of luminaire 105 lm/W. Light colour variable (warm white - daylight white), correlated colour temperature (CCT) variable (2700 K - 6500 K), Colour locus tolerance (initial MacAdam) ≤ 3 SDCM, general colour rendering index (CRI) Ra > 80. Mean rated service life L80(tq 25 °C) = 100,000 h.
Luminaire body sheet steel. (RAL 9016). Dimensions (L x W): 598 mm x 598 mm, luminaire height 90 mm. Protection rating on room side IP40.
With 5-pole terminal to 2.5 mm² for mains connection and further wiring. DALI connection and DALI through-wiring to 1.5 mm². Mains connection of control unit is with a connection terminal. For simple and rapid installation, connection between the luminaire and secondary connection control gear unit is via plug connection.
With external electronic control gear unit to switch, dim and control light colour via DALI device type 8-capable controller. Output ripple of the control gear unit ≤ 4 % for effective control of the LED system and for flicker-free light. Connecting the luminaire to the control gear unit is possible with operating voltage on without disturbances. The luminaire is suitable for operation on a 230V direct voltage supply grid (DC).